Quick guide for Elemental Workshop II

From the RuneScape Wiki, the wiki for all things RuneScape
Jump to: navigation, search
Queen help book.png
This quest has an in-depth guide here.
It contains a more detailed description of dialogue, cutscenes, and storyline.

Overview[edit | edit source]

Getting started[edit | edit source]

Workshop[edit | edit source]

The second key[edit | edit source]

  • Head to the building with an anvil west of the Seers' Village bank.
  • Click on the odd-looking wall to enter it.
  • Go down the stairs.
  • The next step is important as players may not be able to get the key if they do not follow the correct path.
  • Follow the direction from the scroll:
    • Down (already covered by having gone down the stairs)
    • 2 N (2 spaces north)
    • 2 E (2 spaces east)
    • 2 N (2 spaces north)
    • 2 E (2 spaces east)
    • 10 N (10 spaces north)
    • 4 W (4 spaces west)
    • This takes you to the southern part of the north room. Search the machinery to obtain a key.

Elemental bars[edit | edit source]

  • Mine an elemental rock from the west room.
  • Defeat the earth elementals and take the ore they drop (you need two of them).
  • Go to the east room and pull the lever to start the bellows (if the bellows are already working, this step can be skipped).
  • Smelt two elemental bars in the south room. ('Use' the ore on the furnace.)
  • Go to the middle room and use the key obtained from the machinery on the large hatch.
  • Climb down Hatch.

Repairing a workshop[edit | edit source]

The claw[edit | edit source]

A map of the room
  • Search the Schematics crate south of the stairs and take both options.
  • Go back up the spiral stairs and smith a Crane claw on the workbench using 1 elemental bar.
  • Go back down and lower the claw using the lever directly next to the Schematic crate.
  • Use the claw on the crane to repair it, and then lift it again.
  • Place an elemental bar on the jig cart.
  • Lower the crane again.
  • Raise the crane again.
  • Rotate the crane using the other lever.
  • Lower the crane then raise it.
  • Rotate it again then lower it.
  • Raise the crane.
  • Pull the lever behind you, by the picture of a cart.
    • If the lever is pulled and it says the system is not pressurised, go upstairs and activate the water wheel and bellows.

The press[edit | edit source]

  • Climb the staircase in the south-west corner.
  • Move to the west side by the steam press.
  • Open the junction box and connect the pipes by clicking on a pair of pipe holes.
    • From left to right, connect the first top pipe to the third bottom pipe. Connect the second top pipe to the third top pipe. Connect the first bottom pipe to the second bottom pipe.
  • Go downstairs and pull the lever next to the three small pipes.
  • Pull the lever by the picture of a cart again.
Location of the pipe junction box.
Solution picture


The water tank[edit | edit source]

  • Search all of the crates in both the upper and lower levels of the workshop to find 3 cogs and a pipe.
  • Go back up the northeast platform stairs.
  • Go north of the water tank and 'use' the pipe item on the piping with a hole in it.
  • Go back down to the water tank and pull the 'old lever' in front of the tank's door to open it.
  • Turn the corkscrew lever twice to load the elemental sheet into the water tank.
  • Pull the old lever to close the door.
  • Turn the water valve west of the old lever to open the valve.
  • Turn the water valve east of the old lever to raise the water level.
  • Wait for the water to fill the tank, then turn the east valve again, to lower the water level back down.
  • Turn the water valve west of the old lever to close off the water valve.
  • Pull the old lever to open the door.
  • Turn the corkscrew twice.
  • Pull the old lever to close the door.
  • Pull the lever by the picture of a cart.
The piping to 'use' the pipe item on.
The position of the cogs to fix the wind tunnel.

The fan[edit | edit source]

  • Go over to the machine on the east side.
  • On the side of the machine are three pins, place the cogs on the correct pins
    • The small cog goes on the upper left pin, the medium cog on the lower left pin, and the large cog on the right pin.
  • Pull the lever by the fan.
    • If the message says the fan is sucking, the cogs are not on the correct pins. Turn the fan off and position the cogs correctly.
    • If the machine says "It must be powered somewhere else", head upstairs and make sure the water wheel to the north is rotating. If not, pull the lever near the wheel.
  • Pull the lever again.
  • Pull the lever by the picture of a cart.
  • Go by the claw and pick up the Primed bar.

Finishing up[edit | edit source]

  • Go down another level in the workshop (north west stairs).
  • Enter the east door.
  • Place the bar on the extractor gun.
  • Operate the extractor hat.
  • Take the bar from the extractor gun.
  • Go back up to the top floor of the workshop.
  • On the workbench, smith a mind helmet, (The Beaten Book must be in your inventory)
  • Quest complete!

Rewards[edit | edit source]

Elemental Workshop II reward.png
Music unlocked

Required for completing[edit | edit source]

Elemental Workshop II is directly required for the following quests/miniquests:

It is therefore an indirect requirement for the following quests and miniquests: